PLANET WGSW-20160HP - Manual (Page 259)

User’s Manual of WGSW-20160HP/WGSW-24040HP series
259
4.11.7 RADIUS Overview
This Page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration Page. The
RADIUS Authentication/Accounting Server Overview screen in Figure 4-11-8 appears.
Figure 4-11-8: RADIUS Authentication/Accounting Server Overview Page Screenshot
The Page includes the following fields:
RADIUS Authentication Server Status Overview
Object Description
• # The RADIUS server number. Click to navigate to detailed statistics for this server.
• IP Address
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of
this server.
• State
The current state of the server. This field takes one of the following values:
 Disabled: The server is disabled.
 Not Ready: The server is enabled, but IP communication is not yet up and
running.
 Ready: The server is enabled, IP communication is up and running, and
the RADIUS module is ready to accept access attempts.
 Dead (X seconds left): Access attempts were made to this server, but it
did not reply within the configured timeout. The server has temporarily
been disabled, but will get re-enabled when the dead-time expires. The
number of seconds left before this occurs is displayed in parentheses. This
state is only reachable when more than one server is enabled.