5 auto-negotiation – PLANET WGSW-20160HP User Manual

Page 537

Advertising
background image

User’s Manual of WGSW-20160HP/WGSW-24040HP series

537

7.5 Auto-Negotiation

The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth

when a connection is established with another network device (usually at Power On or Reset). This is done by detect the modes

and speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect

with the port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in Full-duplex mode.

Advertising
This manual is related to the following products: