PLANET WGSW-20160HP - Manual (Page 60)

User’s Manual of WGSW-20160HP/WGSW-24040HP series
60
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to renew DHCP. This button is only available if DHCP is enabled.
4.2.3 IPv6 Configuration
Configure the switch-managed IPv6 information on this Page.
The Configured column is used to view or change the IPv6 configuration. The current column is used to show the active IPv6
configuration. The screen in Figure 4-2-3 appears.
Figure 4-2-3: IPv6 Configuration Page Screenshot
The Page includes the following fields:
Object Description
• Auto Configuration
Enable IPv6 auto-configuration by checking this box. If fails, the configured IPv6
address is zero. The router may delay responding to a router solicitation for a few
seconds, the total time needed to complete auto-configuration can be
significantly longer.
• Address
Provide the IPv6 address of this Managed Switch. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is
a special syntax that can be used as a shorthand way of representing multiple
16-bit groups of contiguous zeros; but it can only appear once. It also used a
following legally IPv4 address. For example, '::192.1.2.34'.
• Prefix
Provide the IPv6 Prefix of this Managed Switch. The allowed range is 1 through
128.
• Router Provide the IPv6 gateway address of this Managed Switch. IPv6 address is in