PLANET WGSW-20160HP - Manual (Page 42)

User’s Manual of WGSW-20160HP/WGSW-24040HP series
42
 Approved PLANET SFP Transceivers
PLANET Managed Switch supports both Single mode and Multi-mode SFP transceiver. The following list of approved PLANET
SFP transceivers is correct at the time of publication:
Gigabit SFP Transceiver Modules
 MGB-GT SFP-Port 1000Base-T Module
 MGB-SX SFP-Port 1000Base-SX mini-GBIC module
 MGB-LX SFP-Port 1000Base-LX mini-GBIC module
 MGB-L50 SFP-Port 1000Base-LX mini-GBIC module -50KM
 MGB-L70 SFP-Port 1000Base-LX mini-GBIC module -70KM
 MGB-L120 SFP-Port 1000Base-LX mini-GBIC module -120KM
 MGB-LA10 SFP-Port 1000Base-LX (WDM,TX:1310nm) -10KM
 MGB-LA20 SFP-Port 1000Base-LX (WDM,TX:1310nm) -20KM
 MGB-LB20 SFP-Port 1000Base-LX (WDM,TX:1550nm) -20KM
 MGB-LA40 SFP-Port 1000Base-LX (WDM,TX:1310nm) -40KM
 MGB-LB40 SFP-Port 1000Base-LX (WDM,TX:1550nm) -40KM
Fast Ethernet SFP Transceiver Modules
 MFB-FX SFP-Port 100Base-FX Transceiver -2KM
 MFB-F20 SFP-Port 100Base-FX Transceiver -20KM
 MFB-F60 SFP-Port 100Base-FX Transceiver -60KM
 MFB-FA20 SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm) -20KM
 MFB-FB20 SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm) -20KM
1. It is recommended to use PLANET SFP on the Managed Switch. If you insert an SFP
transceiver that is not supported, the Managed Switch will not recognize it.
2. Port 17 to Port 20 are a shared SFP slot that supports the Gigabit and Fast Ethernet SFP
transceiver.
1. Before we connect WGSW-24040HP series to the other network device, we have to make sure both sides of the SFP
transceivers are with the same media type, for example: 1000Base-SX to 1000Base-SX, 1000Bas-LX to 1000Base-LX.
2. Check whether the fiber-optic cable type matches with the SFP transceiver requirement.
 To connect to 1000Base-SX SFP transceiver, please use the multi-mode fiber cable with one side being the male
duplex LC connector type.
 To connect to 1000Base-LX SFP transceiver, please use the single-mode fiber cable with one side being the male
duplex LC connector type.
In the installation steps below, this Manual uses Gigabit SFP transceiver as an example. However,
the steps for Fast Ethernet SFP transceiver are similar.