PLANET WGSW-20160HP - Manual (Page 341)

User’s Manual of WGSW-20160HP/WGSW-24040HP series
341
to a higher-layer protocol.

InDiscards: The number of inbound packets that are discarded even the
packets are normal.

InErrors: The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.

InUnknownProtos: the number of the inbound packets that were discarded
because of the unknown or un-support protocol.

OutOctets: The number of octets transmitted out of the interface , including
framing characters.

OutUcastPkts: The number of uni-cast packets that request to transmit.

OutNUcastPkts: The number of broad-cast and multi-cast packets that
request to transmit.

OutDiscards: The number of outbound packets that are discarded event the
packets is normal.

OutErrors: The The number of outbound packets that could not be
transmitted because of errors.

OutQLen: The length of the output packet queue (in packets).
• Sample Type
The method of sampling the selected variable and calculating the value to be
compared against the thresholds, possible sample types are:

Absolute: Get the sample directly.

Delta: Calculate the difference between samples (default).
• Value
The value of the statistic during the last sampling period.
• Startup Alarm
The method of sampling the selected variable and calculating the value to be
compared against the thresholds, possible sample types are:

RisingTrigger alarm when the first value is larger than the rising threshold.

FallingTrigger alarm when the first value is less than the falling threshold.

RisingOrFallingTrigger alarm when the first value is larger than the rising
threshold or less than the falling threshold (default).
• Rising Threshold
Rising threshold value (-2147483648-2147483647).
• Rising Index
Rising event index (1-65535).
• Falling Threshold
Falling threshold value (-2147483648-2147483647)
• Falling Index
Falling event index (1-65535).
Buttons
: Click to add a new community entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.