PLANET IGS-10020HPT - Manual (Page 26)

User’s Manual
Enclosure IP30 aluminum case
Installation DIN-rail kit and wall-mount kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm One relay output for power failure. Alarm Relay current carry ability: 1A @ 24V AC
LED Indicator
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
R.O. (Green)
Per 10/100/1000T RJ45 Port:
1000 (Green)
LNK/ACT (Orange)
Per SFP Interface:
1000 (Green)
LNK/ACT (Orange)
Dimensions (W x D x H) 72 x 107 x 152mm
Weight 1036g
Power Requirements DC 12 to 48V, AC 24V Power Adapter
Power Consumption 13.92 watts / 47.76BTU (Full loading)
Layer 2 Functions
Basic Management Interfaces Web browser, Remote Telnet, SNMPv1, v2c, local console
Secure Management Interface SSH, SSL, SNMPv3
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Port Status
Display each port’s speed duplex mode, link status, flow control status, auto
negotiation status, trunk status.
Port Mirroring
TX / RX / Both
Many to 1 monitor
VLAN
802.1Q tagged-based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4095 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP / static trunk
Supports 5 trunk groups with 8 ports for each trunk
QoS
Traffic classification based, strict priority and WRR
8-level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP Packet
IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
26