PLANET IGS-10020HPT - Manual (Page 383)

User’s Manual
4.20.4 Ethernet Ring Protocol Switch Configuration
This page allows the user to inspect and configure the current ERPS Instance; screen in Figure 4-20-4 appears.
Figure 4-20-4: Ethernet Ring Protocol Switch Configuration page screenshot
The page includes the following fields:
Instance Data:
Object Description
The ID of the Protection group.  ERPS ID
See help on ERPS create WEB.  Port 0
See help on ERPS create WEB.  Port 1
See help on ERPS create WEB.  Port 0 SF MEP
See help on ERPS create WEB.  Port 1 SF MEP
See help on ERPS create WEB.  Port 0 APS MEP
See help on ERPS create WEB.  Port 1 APS MEP
Type of Protecting ring. It can be either major ring or sub-ring.  Ring Type
Instance Configuration:
Object Description
 Configuration
Red : This ERPS is only created and has not yet been configured - is not active.
Green : This ERPS is configured - is active.
383