PLANET IGS-10020HPT - Manual (Page 91)

User’s Manual
4.2.15 SMTP Configuration
This Page facilitates an SMTP Configuration on the switch. The SMTP Configure screen in Figure 4-2-18 appears.
Figure 4-2-18: SMTP Configuration Page Screenshot
The Page includes the following fields:
Object Description
Controls whether SMTP is enabled on this switch.  SMTP Mode
Type the SMTP server name or the IP address of the SMTP server.  SMTP Server
Set port number of SMTP service.  SMTP Port
 SMTP Authentication Controls whether SMTP Authentication is enabled If authentication is required
when an e-mail is sent.
Type the user name for the SMTP server if Authentication is Enable.  Authentication User
Name
Type the password for the SMTP server if Authentication is Enable.  Authentication
Password
Type the sender’s E-mail address. This address is used for replying e-mails.  E-mail From
Type the subject/title of the e-mail.  E-mail Subject
 E-mail 1 To Type the receiver’s e-mail address.
 E-mail 2 To
Buttons
: Send a test mail to mail server to check this account is available or not.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
91