PLANET IGS-10020HPT - Manual (Page 93)

User’s Manual

Event As Digital Input:
Allows user to record alarm message to System log, syslog or issues out via
SNMP Trap or SMTP.
As default SNMP Trap and SMTP are disabled, please enable them first if you
want to issue alarm message via them.
As Digital Output:
Allows user to monitor an alarm from port failure, power failure, Digital Input 0
(DI 0) and Digital Input 1(DI 1) which means if Digital Output has detected
these events, then Digitial Output would be triggered according to the setting of
Condition.
Allows user to choose which power module that needs to be monitored.  Power Alarm
Allows user to choose which port that needs to be monitored. 
Port Alarm
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.2.17 Fault Alarm
This Page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen in Figure 4-2-20
appears.
Figure 4-2-20: Fault Alarm Control Configuration Page Screenshot
93