PLANET IGS-10020HPT - Manual (Page 377)

User’s Manual
4.20.1 MEP Configuration
The Maintenance Entity Point instances are configured here; screen in Figure 4-20-1 appears.
Figure 4-20-1: MEP configuration page screenshot
The page includes the following fields:
Object Description
This box is used to mark a MEP for deletion in next Save operation.  Delete
 Instance The ID of the MEP. Click on the ID of a MEP to enter the configuration page.
 Domain
Port : This is a MEP in the Port Domain. 'Flow Instance' is a Port.
Esp : Future use
Evc : This is a MEP in the EVC Domain. 'Flow Instance' is a EVC
Mpls : Future use
 Mode MEP : This is a Maintenance Entity End Point.
MIP : This is a Maintenance Entity Intermediate Point.
 Direction
Ingress : This is a Ingress (down) MEP - monitoring ingress traffic on 'Residence
Port'.
Egress : This is a Egress (up) MEP - monitoring egress traffic on 'Residence
Port'.
The port where MEP is monitoring - see 'Direction'.  Residence Port
The MEG level of this MEP.  Level
 Flow Instance The MEP is related to this flow - See 'Domain'.
 Tagged VID
Port MEP : An outer C/S-tag (depending on VLAN Port Type) is added with this
VID.
Entering '0' means no TAG added.
The MAC of this MEP - can be used by other MEP when unicast is selected (Info
only).
 This MAC
There is an active alarm on the MEP.  Alarm
377