PLANET IGS-10020HPT - Manual (Page 58)

User’s Manual
3.3 CLI Mode Management
There are two ways for CLI mode management, one is remote telnet and the other operated from console port. Remote telnet is
an IP-based protocol and console port is for user to operate the IGS-20040MT locally only; however, their operations are the
same.
The command line user interface is for performing system administration, such as displaying statistics or changing option
settings. When this method is used, you can access the Industrial Managed Switch remote telnet interface from personal
computer, or workstation in the same Ethernet environment as long as you know the current IP address of the Industrial
Managed Switch .
1. There are five switches with RJ45 type console connector. (IGS-10020PT / IGS-10020HPT / IGS-10080MFT /
IGS-12040MT / IGS-20040MT )
2. Let’s take IGS-20040MT for example.
Direct Access
Direct access to the administration console is achieved by directly connecting a terminal or a PC equipped with a
terminal-emulation program (such as HyperTerminal) to the Managed Switch console (serial) port. When using this
management method, a straight DB9 RS-232 cable is required to connect the switch to the PC. After making this connection,
configure the terminal-emulation program to use the following parameters:
The default parameters are:
58