PLANET IGS-10020HPT - Manual (Page 37)

User’s Manual
Reset Button Pressed and Released Function
< 5 sec : System Reboot Reboot the Industrial Managed Switch.
> 5 sec : Factory Default
Reset the Industrial Managed Switch to Factory Default
configuration. The Industrial Managed Switch will then reboot
and load the default settings as shown below:
。 Default Username: admin
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway: 192.168.0.254
2.1.3 LED Indications
IGS-10020MT
 System
LED Color Function
P1 Green Indicates power 1 has power.
P2 Green Indicates power 2 has power.
Fault Green Indicates either power 1 or power 2 has no power.
On Indicates the ERPS Ring has been created successfully.
Ring
Off Indicates the ERPS Ring hasn’t been created.
Green Indicates the Ring Owner has been enabled.
R.O.
Off Indicates the Ring Owner hasn’t been enabled.
 Per 10/100/1000BASE-T Port
LED Color Function
Lights Indicates the link through that port is successfully established.
LNK / ACT Green
Blinks
Indicates that the Switch is actively sending or receiving data over that
port.
Lights
Indicates that the port is successfully connecting to the network at
1000Mbps.
1000 Orange
Off
Indicates that the port is successfully connecting to the network at
10Mbps or 100Mbps.
37