PLANET IGS-10020HPT - Manual (Page 386)

User’s Manual
4.20.5 Ring Wizard
This page allows the user to configure the ERPS by wizard; screen in Figure 4-20-4 appears.
Figure 4-20-5: Ring Wizard page screenshot
The page includes the following fields:
Object Description
Set all the switch numbers for the ring group. The default number is 3 and
maximum number is 30.
 All Switch Numbers
The switch where you are requesting ERPS.  Number ID
Configures the port number for the MEP.  Port
Set the ERPS VLAN.  VLAN
Buttons
: Click to configure ERPS.
: Click to save changes.
: Click to show the ring topology.
386