PLANET WDRT-750AC User Manual
Page 23
Advertising
User Manual of WDRT-750AC
-17-
3.
Open a command prompt, and type ping 192.168.1.1, and then press Enter.
If the result displayed is similar to
Figure 4-7
, it means the connection between your PC and the
Router has been established well.
Figure 4-7 Success Result of Ping Command
If the result displayed is similar to
Figure 4-8
, it means the connection between your PC and the
Router has failed.
Figure 4-8 Failure Result of Ping Command
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some
firewall software programs may block a DHCP request on newly installed adapters.
Advertising