PLANET WNAP-6306 - Manual (Page 19)

User’s Manual of WNAP-6306
Chapter 3. Hardware installation
This chapter describes safety precautions and product information you have to know and check before
installing WNAP-6306.
3.1 Preparation before Installation
3.1.1 Professional Installation Required
Please seek assistance from a professional installer who is well trained in the RF installation and
knowledgeable in the local regulations.
3.1.2 Safety Precautions
1. To keep you safe and install the hardware properly, please read and follow these safety
precautions.
2. If you are installing WNAP-6306 for the first time, for your safety as well as others’, please seek
assistance from a professional installer who has received safety training on the hazards
involved.
3. Keep safety as well as performance in mind when selecting your installation site, especially
where there are electric power and phone lines.
4. When installing WNAP-6306, please note the following things:
 Do not use a metal ladder;
 Do not work on a wet or windy day;
 Wear shoes with rubber soles and heels, rubber gloves, long sleeved shirt or jacket.
5. When the system is operational, avoid standing directly in front of it. Strong RF fields are present
when the transmitter is on.
3.1.3 Installation Precautions
1. Users MUST use a proper and well-installed surge arrestor and grounding kit with WNAP-6306;
otherwise, a random lightening could easily cause fatal damage to WNAP-6306. EMD (Lightning)
DAMAGE IS NOT COVERED UNDER WARRANTY.
2. Users MUST use the “AC Adapter & PoE Injector” shipped in the box with the WNAP-6306. Use of
other options will cause damage to the WNAP-6306.
3. Users MUST power off the WNAP-6306 first before connecting the antenna to it, otherwise,
damage might be caused to the WNAP-6306 itself.
4. The Antenna is required, and must be purchased separately.
5. No enclosure mounting is required, just the Antenna need to be mounted properly.
- 19 -