PLANET WNAP-6306 - Manual (Page 33)

User’s Manual of WNAP-6306
5.3 Internet Setup
5.3.1 WISP
Figure 5-7 WISP
The page includes the following fields:
Object Description
WISP Status
You can choose “enable” or “disable” to enable or disable the
“WISP”. The Wireless ISP (WISP) mode allows that the wireless
interface is treated as WAN port, and the Ethernet port is LAN port.
User must configure wireless encryption connection and set the
Radio Mode to “Client”.
SSID
You can manually enter the SSID of the Wireless AP that you want
to connect, or click “AP Scan” to site survey a AP.
Authentication Type
Select the correct Authentication Type that should be the same as
the Wireless AP that you want to connect to.
- 33 -