Connect your pc to the module – ProSoft Technology MVI69-DFCM User Manual
Page 20
Advertising
MVI69-DFCM ♦ CompactLogix or MicroLogix Platform
Start Here
DF1 Interface Module
Page 20 of 117
ProSoft Technology, Inc.
November 3, 2008
1.8
Connect your PC to the Module
With the module securely mounted, connect your PC to the Configuration/Debug
port using an RJ45-DB-9 Serial Adapter Cable and a Null Modem Cable.
1 Attach both cables as shown.
2 Insert the RJ45 cable connector into the Configuration/Debug port of the
module.
3 Attach the other end to the serial port on your PC or laptop.
Advertising