ProSoft Technology MVI69-DFCM - Manual (Page 86)

MVI69-DFCM ♦ CompactLogix or MicroLogix Platform Reference
DF1 Interface Module
Page 86 of 117 ProSoft Technology, Inc.
November 3, 2008
RS-232: Null Modem Connection (Hardware Handshaking)
This type of connection is used when the device connected to the module
requires hardware handshaking (control and monitoring of modem signal lines).
RS-232: Null Modem Connection (No Hardware Handshaking)
This type of connection can be used to connect the module to a computer or field
device communication port.
Note: If the port is configured with the "Use CTS Line" set to 'Y', then a jumper is required between
the RTS and the CTS line on the module connection.