ProSoft Technology MVI56E-GSC/ GSCXT - Manual (Page 14)

Start Here MVI56E-GSC ♦ CompactLogix or MicroLogix Platform
User Manual Enhanced Generic ASCII Serial Communication Module
Page 14 of 140 ProSoft Technology, Inc.
May 9, 2014
____________ Data bits?
____________ Parity?
____________ Stop bits?
6 ____________ Wiring type to use (RS232, 422 or 485). Configured by
jumper settings.
Required for proper implementation of the module.
Note: If you are installing your module into a new system, and plan to use our Sample Ladder
Logic, refer to the printed Quick Start Guide in the module package for simple installation
procedures.

For version 16 or newer of RSLogix 5000, refer to Upload the Add-On Instruction from the
Module.
 For EXISTING system installations, refer to Using the Sample Program - RSLogix 5000
Version 15 and earlier (page 124).
Note: Most applications can use the Sample Ladder Logic without modifying the sample program.
1.5 Package Contents
The following components are included with your MVI56E-GSC module, and are
all required for installation and configuration.
Important: Before beginning the installation, please verify that all of the following items are
present.
Qty. Part Name Part Number Part Description
1 MVI56E-GSC Module MVI56E-GSC Enhanced Generic ASCII Serial
Communication Module
1 Cable RL-CBL025 5 foot Ethernet Straight-Through Cable
(Gray)
2 Cable Cable #14, RJ45 to
DB9 Male Adapter
cable For DB9 Connection to Module’s
Application Serial Port
2 Adapter 1454-9F Two Adapters, DB9 Female to Screw
Terminal. For RS422 or RS485
Connections to Port 1 and 2 of the Module
1 ProSoft Solutions
DVD DVD-001 Contains ProSoft Configuration Builder
(PCB) and ProSoft Discovery Service (PDS)
for the MVI56E-GSC modules.
If any of these components are missing, please contact ProSoft Technology
Support for replacement parts.
1.6 Setting Jumpers
There are three jumpers located at the bottom of the module. The first two
jumpers (P1 and P2) set the serial communication mode: RS-232, RS-422 or RS-
485.