ProSoft Technology MVI56E-SIE - Manual (Page 15)

MVI56E-SIE ♦ ControlLogix Platform Start Here
Client Communication Module User Manual
ProSoft Technology, Inc. Page 15 of 168
September 6, 2012
1.4 Setting Jumpers
The Setup Jumper acts as "write protection" for the module’s flash memory. In
"write protected" mode, the Setup pins are not connected, and the module’s
firmware cannot be overwritten. Do not jumper the Setup pins together unless
you are directed to do so by ProSoft Technical Support.
The following illustration shows the MVI56E-SIE jumper configuration.
Note: If the module is being installed in a remote rack, the Setup pins can be left
jumpered. That way, the module’s firmware can be updated without requiring
physical access to the module.