ProSoft Technology MVI56E-SIE - Manual (Page 76)

Configuring the MVI56E-SIE Module MVI56E-SIE ♦ ControlLogix Platform
User Manual Client Communication Module
Page 76 of 168 ProSoft Technology, Inc.
September 6, 2012
13 In the Variable table dialog box, type in the destination addresses as shown
below. Right-click an entry in the Status value column and select M ONITOR to
see the variables in addresses DB1.DBW 0 through DB1.DBW 8.
If the values from controller tags SIE.WriteData[0] through SIE.WriteData[4] were
successfully transmitted, they will appear in the Status value column for
addresses DB1.DBW[0] through DB1.DBW[8].