ProSoft Technology MVI56E-SIE - Manual (Page 85)

MVI56E-SIE ♦ ControlLogix Platform Configuring the MVI56E-SIE Module
Client Communication Module User Manual
ProSoft Technology, Inc. Page 85 of 168
September 6, 2012
2.2.7 Static ARP Table
The Static ARP Table defines a list of static IP addresses that the module will
use when an ARP (Address Resolution Protocol) is required. The module will
accept up to 40 static IP/MAC address data sets.
Use the Static ARP table to reduce the amount of network traffic by specifying IP
addresses and their associated MAC (hardware) addresses that the MVI56E-SIE
module will be communicating with regularly.
Important: If the device in the field is changed, this table must be updated to
contain the new MAC address for the device and downloaded to the module. If
the MAC is not changed, no communications with the module will be provided.
IP Address
Dotted notation
This table contains a list of static IP addresses that the module will use when an
ARP is required. The module will accept up to 40 static IP/MAC address data
sets.
Important: If the device in the field is changed, this table must be updated to
contain the new MAC address for the device and downloaded to the module. If
the MAC is not changed, no communications with the module will occur.
Hardware MAC Address
Hex value
This table contains a list of static MAC addresses that the module will use when
an ARP is required. The module will accept up to 40 static IP/MAC address data
sets.
Important: If the device in the field is changed, this table must be updated to
contain the new MAC address for the device and downloaded to the module. If
the MAC is not changed, no communications with the module will occur.