ProSoft Technology MVI56E-SIE - Manual (Page 89)

MVI56E-SIE ♦ ControlLogix Platform Configuring the MVI56E-SIE Module
Client Communication Module User Manual
ProSoft Technology, Inc. Page 89 of 168
September 6, 2012
4 In the Connection Setup dialog box, click the B ROWSE D EVICE ( S ) button to
open the ProSoft Discovery Service. Select the module, then right-click and
choose A
SSIGN T EMPORARY IP.
5 The module’s default IP address is 192.168.0.250. Choose an unused IP
within the same subnet, and then click OK.
Important: The temporary IP address is only valid until the next time the module
is initialized. For information on how to set the module’s permanent IP address,
see Ethernet Configuration (page 86).