Using wi-fi, Using a qr code to share your wi-fi hotspot, Transferring data using wi-fi direct – Huawei P10 User Manual

Page 52

Advertising
background image

Connecting to a Wi-Fi network using Wi-Fi Protected Setup (WPS)

WPS allows your device to connect to a WPS-enabled router without entering a password.

1

Go to

Settings.

2

Touch Wi-Fi and switch on Wi-Fi.

3

Touch

> Advanced Wi-Fi settings. There are two options:

l

Touch WPS connection and press the router's WPS button.

l

Touch WPS PIN connection to generate a PIN, and then enter the PIN on the router.

Using Wi-Fi+

When Wi-Fi+ is enabled, your device will automatically enable or disable Wi-Fi and connect to
the Wi-Fi network with the best signal.

You may incur additional data charges when downloading large files or watching online
videos over mobile data. To avoid incurring excessive data charges, purchase a data plan.
Contact your carrier for details.

1

Open

Settings.

2

Touch Wi-Fi > Wi-Fi+ and turn on the Wi-Fi+ switch.

When Wi-Fi+ is enabled, your device will record your Wi-Fi connection history and monitor your
signal strength and location. This information is then used to enable or disable Wi-Fi and
connect to the Wi-Fi network with the strongest signal.

Using a QR code to share your Wi-Fi hotspot

Create a QR code to share your device's Wi-Fi hotspot with friends.

l

QR codes can be generated for the following wireless encryption methods: WPA, WPA2,
WEP, WPA-PSK, and WPA2-PSK. You cannot use a QR code to connect to WLAN
networks that are encrypted using the EAP protocol.

l

Ensure that the connecting device supports using QR codes to import Wi-Fi network
credentials.

1

Go to

Settings.

2

Select Wi-Fi and turn on the Wi-Fi switch.

3

Once connected, touch the name of the network to generate a QR code.

4

On the connecting device, touch the center of the screen and swipe down. Touch

, scan

the QR code, and then follow the onscreen instructions to connect to the Wi-Fi hotspot.

Transferring data using Wi-Fi Direct

Wi-Fi Direct lets you transfer data directly between two Huawei devices without connecting to a
Wi-Fi network. Wi-Fi Direct is similar to Bluetooth, but offers faster transfer speeds, making it
suitable for sharing larger files.

Network and Sharing

46

Advertising
This manual is related to the following products: