Replacing the filters – Epson 9300i User Manual
Page 102
Advertising
![background image](/manuals/84998/102/background.png)
102
Maintaining the Projector
Replacing the Filters
1. Turn the projector over (unless it’s ceiling-mounted).
2. Remove the filters from the projector by sliding them out to the
sides.
3. Remove each filter from its holder by releasing the two tabs, as
shown.
4. Install new filters in the holders, aligning the tabs with the slots on
each side.
5. Slide the assembled filters back into the projector.
1
2
Tabs
Advertising