Epson 9300i - Manual (Page 97)

Managing the Projector from a Remote Computer 97
System Requirements
Before you install the software, make sure your system meets these
requirements:
■ Microsoft Windows 98 SE, Windows Me, Windows 2000
Professional, Windows XP Home Edition, Windows XP
Professional
■ Pentium MMX 166 MHz or higher
(Pentium II 233 MHz or higher recommended)
■ 8MB or more memory
■ 1MB or more of free hard disk space
■ XGA (1024 × 768) or better display adapter and monitor
Installing the Software
1. Turn on the computer’s power, start Windows, and then place
the EPSON Projector Software for Multi Screen CD-ROM into
the computer’s CD-ROM drive.
The installer will start automatically.
2. Click Next and follow the
on-screen instructions.
3. The following screen appears
when the installation is complete.
Click Finish .
note
Only users with
administrator rights can
perform the installation on
Windows 2000/XP.
note
If the setup program does not
start up automatically, click
Start > Run, then type the
drive letter of the CD-ROM
drive followed by
:\EMPMSA\SETUP.exe
and click OK.