Epson 9300i - Manual (Page 90)

90 Managing the Projector from a Remote Computer
The following table explains the meaning of the error icons
(see page 109 for recommended solutions to problems):
Controlling Your Projector(s)
The control buttons in the upper-right let you turn on and off the
projectors and select video sources. (Hold the mouse pointer over a
button to see a description of its meaning.) Make sure you’ve selected
the projector(s) you want to operate (with the mouse pointer) before
clicking one of the buttons.
Error icons
Lamp replacement notification (the lamp is nearing
the end of its life; see page 103)
High-speed cooling in progress (the projector is
getting too hot but continues to operate)
Overheating (projection turned off automatically)
Lamp out or lamp cover open
Fan error
Sensor error
Internal problem
note
To turn on a projector when
it’s in standby mode
(plugged in but not
projecting and not in full
sleep mode), you must have
selected
Network ON as the
Standby Mode setting in
the projector’s menu system
(see page 76).
Control buttons