Epson 9300i - Manual (Page 25)

Setting Up the Projector 25
Connecting Using a BNC Cable
1. Locate a BNC video cable (one may be included with your video
equipment).
2. Connect the cable to your player and the corresponding R/G/B
connectors on the projector.
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image. Once the projector is turned on, be sure to:
■ Enter the projector’s Setting menu, then change the BNC
Input setting to
RGB-Video (see page 75).
■ After exiting the menu system, select BNC as the source to see
your image (see page 38).