Epson 9300i - Manual (Page 68)

68 Fine-tuning the Projector
Adjusting the Image Quality
You can use the Video menu to adjust the brightness, sharpness, and
contrast. If you’re projecting from a computer (but not through the
DVI port), there are additional adjustments you can make (see
page 69).
1. Press the Menu button on the remote control, then enter the
Video menu.
You see the Video menu screen (the actual settings may vary,
depending on the selected input source).
2. Use the pointer button to highlight the desired option, then
adjust it as needed:
■ Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas. If you’re
projecting from a computer, select
Auto to let the projector
adjust the contrast automatically; or select Manual and then
press Enter to adjust the setting yourself.
■ Sharpness
Adjusts the sharpness of the image.
Video
Audio
Color Mode Color Mode
Position
Tracking
Sync.
Brightness
Contrast
Sharpness
:
:
:
:
:
Select
0000
0
0 0
0 0
+ -
+ -
Adjust
[Presentation ] [Presentation ]
:
:
Resolution Resolution
Reset Reset Execute Execute
:
[ ]
[ ]: Enter [ ]: Enter [ ]: Select [ ]: Select [Menu]: Exit [Menu]: Exit
Reset All
About
Advanced2
Advanced1
User’s Logo
Setting
Effect
Preset Preset
Auto Auto Manual Manual
Auto Auto Manual Manual
Set Set
Adjust
Select
note
The Brightness setting
changes the opacity of the
projector’s LCD panels.