Epson 9300i - Manual (Page 38)

38 Displaying and Adjusting the Image
Selecting the Image Source
Selecting the image source lets you switch between images input from
different pieces of equipment connected to the projector (such as a
computer or DVD player).
If you don’t see the image you want, select it using the Source
buttons either on the projector or the remote control.
The Source buttons work as follows:
■ The projector has two Source buttons. Use the Computer/DVI
button to switch between equipment connected to the
Computer 1, Computer 2, and DVI ports.
Use the Video/BNC button to switch between equipment
connected to the Video, S-Video, and BNC ports.
■ The remote control has seven Source buttons. Use them to
switch between equipment connected to the port identified on
each button.
Note that the Computer 1, Computer 2, and BNC ports can be set up
to use different input signals (for example, Analog RGB or RGB
Video)—so if you have equipment connected to one of these ports, it’s
important to make sure the correct signal is selected to match the
equipment you’re using. You can select the input signal settings using
the projector’s menu system; see page 75.
note
To focus and adjust the
image, see page 42. If a
projected image fails to
appear, see page 39 for help.
note
You can also preview all
sources on one screen to help
you select the desired source
(see page 56).