Epson 9300i - Manual (Page 64)

64 Giving Your Presentation
6. Use the arrow buttons to select a zoom rate (display size), and
then press Enter .
7. When the message “Save image as user’s logo?” appears, select Yes
and press Enter .
Saving the logo may take a few moments. Do not use your
projector or video source (computer, DVD player, etc.) while the
logo is being saved.
8. When you see the message “Completed,” press E SC to return to
the menu screen.
Choosing When to Display the Image
After your image is saved, you can set it up as the startup screen, or the
screen you see when there’s no signal or when you press the
A/V Mute
button (see page 57).
1. Press the Menu button to display the menu screen (if not already
displayed).
2. To display your image as the startup screen, highlight the
Advanced 1 menu, then press Enter . Select Startup Screen ,
highlight ON , then press Enter .
To display your image on the No-Signal or A/V Mute screen,
continue with the following steps.
3. Highlight the Setting menu, then press Enter .
4. Select the screen(s) on which you want your image to appear:
■ Highlight No-Signal Msg. if you want to display your image
(instead of a blank screen) when there is no video signal
incoming from the currently selected source.
■ Highlight A/V Mute if you want your image to appear when
you press the A/V Mute button.
5. Select Logo , then press Enter . This sets your image as the screen
to be displayed. (Or select Blue if you prefer to display a blue
screen instead.)
6. When you’re finished, press E SC to exit.
Set the zoom rate.
Zoom rate: Zoom rate:
100% 100% 200% 200% 300% 300%
User’s Logo User’s Logo