Epson 9300i - Manual (Page 32)

32 Setting Up the Projector
Connecting an External Monitor
If you want to monitor your presentation close-up (on a monitor
placed beside the projector) as well as on the screen, you can connect
an external monitor. You can use it to check on your presentation or
switch between picture sources even if you’ve pressed the
A/V Mute
button to turn off projection on the screen.
To attach an external monitor, connect it to the projector’s Monitor
Out port, as shown:
Follow these guidelines to view images on the monitor:
■ The monitor displays the currently selected video source. Press the
Preview button if you want to display all the active sources at the
same time (see page 56).
■ You can also view images on the monitor while the projector is in
standby mode (plugged in but not turned on), if the
Standby
Mode setting has been set to Network ON (see page 76).
note
The monitor can display
images from any connected
computer or video source.
LCD monitors may not be
able to display the image
correctly. If you have trouble
displaying the image,
connect a multiscan
monitor.
External monitor