Epson 9300i - Manual (Page 74)

74 Fine-tuning the Projector
Using Direct Power On
You can set up the projector to turn on immediately once it is plugged
in (or receives power from a wall switch).
1. Press the Menu button on the remote control, then enter the
Advanced2 menu.
2. Use the pointer button to highlight Direct Power ON , then
choose ON and press the Enter button to select it.
Make sure you do not unplug the projector to turn it off. You must
power off the projector as described on page 47 to allow it to cool
down, or you will damage the projector.
: Video
Audio
Setting
User’s Logo
Advanced1
About
Reset All
Reset Execute
[Menu]: Exit [Menu]: Exit [ ]: Enter [ ]: Enter [ ]: Select [ ]: Select
Effect
Advanced2
BNC Sync Termination ermination ON OFF :
Projector ID
Network
: 1
COM Port COM Port :
Set
Set
RS-232C USB
Auto Setup ON OFF :
Direct Power ON ON OFF :