Epson 9300i - Manual (Page 21)

Setting Up the Projector 21
Connecting a Composite Video Source
1. Locate an RCA video cable (one may be provided with your video
equipment).
2. Connect the cable to the yellow video output connector on your
player and the yellow Video connector on the projector:
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image. Once the projector is turned on, be sure to select
Video as
the source to see your image (see page 38).