Epson 9300i - Manual (Page 119)

A
Appendix A: Projector Installation 119
A
Appendix A: Projector
Installation
T
his appendix provides guidelines on installing the projector in a
permanent location, such as a theater or conference room.
Placement and Mounting Guidelines
The projector can be installed for four different viewing setups: front
projection, ceiling mounting, rear projection onto a semi-transparent
screen, or rear/ceiling projection, as shown:
To project from overhead, you’ll need the optional ceiling mounting
hardware; see page 14 for ordering information. You’ll also need to
select
Ceiling in the projector’s Advanced1 menu to flip the image
upside-down. To project from the rear, select Rear Proj (see page 77).
If the projector is positioned at screen-height (anywhere between the
bottom and the top of the screen), you can use the
Lens Shift
function to adjust the position of the image on-screen (see page 43).
Front projection Ceiling mounting
Rear projection
Rear/ceiling projection
note
See page 16 for more
information on projector
placement.