Epson 9300i - Manual (Page 87)

Managing the Projector from a Remote Computer 87
2. Click Register projector as shown.
You see this screen:
3. Click Auto detect to locate projectors currently operating on the
network. Or click Manual registration and enter the projector’s
name and network address. (Manual registration may be required
on some networks.)
Any projectors found on the network are listed as shown below:
4. Select the projectors you want to add by clicking their name.
Then click Add , and on the next screen click Close .
Click here
note
If the name of a projector
does not appear, you can
give it a name or change its
existing one in EMP
NetworkManager
(see page 95).
Click here