Epson DS-32000 Large-Format Document Scanner User Manual
Page 65
65
Do not feed valuable photos, artwork, or important documents into the scanner directly. Misfeeding may
wrinkle or damage the original. When scanning these types of originals, use a carrier sheet (not
included).
Caution:
Be careful when loading the following types of originals, or they may be damaged or may not
scan successfully:
• Originals with uneven surfaces, such as embossed documents
• Curled or wrinkled originals
• Perforated originals
• Originals with labels or stickers
• Carbon-less paper
• Ripped, curled, or wrinkled originals
• Coated paper
Warning:
Carbon-less paper contains chemical substances that may damage the rollers inside the
scanner. Make sure you clean the pickup roller and the separation rollers regularly. Scanning carbon-
less paper may reduce the service life of the rollers compared with scanning plain paper.
Note:
When attempting to scan these types of originals, note the following:
• Slow down the feeding speed when scanning wrinkled originals, and smooth out the wrinkles if
possible
• Use the optional carrier sheet to scan originals that are delicate or wrinkled
• If originals are incorrectly detected as double feeds, set the
DFDS Function
to
On
on the control
panel, or select
Off
as the
Detect Double Feed
setting in Epson Scan 2
• Labels or stickers must be firmly adhered to the scanned original with no exposed glue
• Try to flatten curled originals as much as possible
Parent topic:
Loading Originals in the Input Tray
Loading Plastic and Laminated Cards in the Input Tray
You can load plastic and laminated cards that meet the card specifications in the input tray.
Note:
To increase the accuracy of auto size detection when scanning laminated cards, select the
Document Size
>
Settings
>
Scan laminated card
setting in Epson Scan 2.