Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 11)

11
Part names and function
Front Panel
❿ SIG/PK·ASSIGN LED
Indicates the signal level of input channel 6 when the level or gain
is being adjusted.
Also lights when on/off of the output bus assignment is set.
⓫ SIG/PK·AEC LED
Indicates the signal level of input channel ST when the level or
gain is being adjusted.
Also lights when on/off of the AEC is set.
⓬ SIG/PK·PRESET SAVE LED
Indicates the signal level of an output channel when the level or
gain is being adjusted.
Also lights when a preset is saved.
⓭ OUTPUT SEL LED
Indicates if an output channel is selected.
⓮ MODE button
Selects a function.
⓯ INPUT SEL button
Selects an input channel or preset number.
⓰ OUTPUT SEL button
Selects the output channel. Lights green for Output 1, red for
Output 2, or yellow for Output ST.
⓱ Volume LED
Indicates the current setting of the selected channel when the
level or gain is being adjusted.
⓲ Dial button
Turn the dial button to select, and push to confirm the selection.
❶ Power button
Turns on/off the power to the product.
❷ PRESET LED
Lights and blinks when the power is turned on and indicates that
the product is being started.
Lights when a preset is being recalled.
❸ LEVEL·GAIN LED
Lit: You can adjust the input level and output level.
Blinking: You can adjust the gain.
❹ INPUT SEL LED
Indicates the input channel, preset bank number, and the status of
the function/setting of each channel.
❺ SIG/PK·MIC/LINE LED
Indicates the signal level of input channel 1 when the level or gain
is being adjusted.
Also lights when the input type is changed (MIC/LINE).
❻ SIG/PK·PHANTOM LED
Indicates the signal level of input channel 2 when the level or gain
is being adjusted.
Also lights when on/off of the phantom power is set.
❼ SIG/PK·LOW CUT LED
Indicates the signal level of input channel 3 when the level or gain
is being adjusted.
Also lights when on/off of the low-cut is set.
❽ SIG/PK·PRIORITY LED
Indicates the signal level of input channel 4 when the level or gain
is being adjusted.
Also lights when on/off of the priority is set.
❾ SIG/PK·SMART MIX LED
Indicates the signal level of input channel 5 when the level or gain
is being adjusted.
Also lights when on/off of the SmartMixer is set.
❸ ❺ ❸ ❹ ❺ ❻ ❼ ❽ ❾ ❿ ⓫ ⓭ ⓬
⓮ ⓯ ⓰ ⓲ ⓱