Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 43)

43
Setting the system details (Settings & Maintenance)
Network (System Settings)
IP Control & Web Remote Port Settings
Set how to obtain IP addresses, and specify each value.
1. From “IP Config Mode”, select “Auto” or “Static”.
Auto IP addresses are automatically assigned from the DHCP
server, etc.
Static Specify static IP addresses.
Selecting “Static” enables the “IP Address”, “Subnet
Mask”, and “Gateway Address” fields. Enter the addresses
you want to specify.
The default value is "192.168.33.102".
2. Click “Apply”.
• Setting is complete.
Allow Discovery
Set the product to be discovered automatically by "Locate".
1. Click the switch.
• The function is turned ON (blue)/OFF (no color) each time the dial is
clicked.
• When the function is turned on, the product can be identified by "Locate".
2. Click “Apply”.
• Setting is complete.
IP Control Settings
Set the options relating to IP control.
1. Set each item.
Port Number The port number of the IP control is
displayed.
Notification Receive notifications from IP-controlled
devices.
Audio Level Notification* Receive audio level notifications from
IP-controlled devices.
Multicast Address* Set the address for multicast.
Multicast Port Number* Set the port number for multicast.
* This item can be set only when “Notification” is turned ON (blue).
2. Click “Apply”.
• Setting is complete.
NTP Settings
Set the NTP (Network Time Protocol).
1. Set each item.
Enabled Set whether to enable or disable the NTP
(Network Time Protocol).
Server Address Set the NTP server address.
Port Number Set the NTP port number.
Time Zone Set the time difference from the UTC
(Coordinated Universal Time).
Daylight Saving Time Turn on/off the daylight saving time.
Start Date & Time* Set the starting date/time of daylight saving
time.
End Date & Time* Set the ending date/time of daylight saving
time.
* This can be set only when "Daylight Saving Time" is ON (blue).
2. Click “Apply”.
• Setting is complete.
User Access (System Settings)
Default Front Panel Mode
Set the front panel mode when the power is on.
1. Select "Administrator"/"Operator".
2. Click “Apply”.
• Setting is complete.
Login Password
Set whether or not to require a password for Administrator login.
1. Click the switch to turn on/off the setting.
• The function is turned ON (blue)/OFF (no color) each time the dial is
clicked.
2. Enter a desired password.
• Create a password using 4 to 8 alphanumeric characters.
3. Click “Apply”.
• Setting is complete.
Operator Page Permissions
Set whether or not to limit the devices that can be accessed by the
Operator.
1. Click the switch to turn on/off this function.
• The function is turned ON (blue)/OFF (no color) each time the dial is
clicked.
2. Enter the IP addresses of the devices that can be accessed by
the Operator.
• Up to 5 devices can be registered.
3. Click “Apply”.
• Setting is complete.
• No other device can be accessed by the Operator.