Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 44)

44
Setting the system details (Settings & Maintenance)
Audio (System Settings)
Audio System
Check/change the audio-related system settings.
1. Set each item.
Gain Unit Type Set the unit in which the gain is displayed for
adjustment.
Delay Unit Type Set the unit in which the delay time is
displayed for setting.
Output Flip Switch the output ports.
Input EQ/DYN Display Set the graph display for the Audio Input
Settings screen.
Virtual Mic Mode Select to include the virtual mic as an option
in the input type pull-down menu.
2. Click “Apply”.
• Setting is complete.
Output Flip (output mode switching)
Output of each channel assigned to an output bus is as described
below.
• When "Output Flip" is OFF
• When "Output Flip" is ON
• When "Output Flip" is turned on, the OUTPUT ST notation on the audio
output screen changes to OUTPUT L/R.
Array Mic Mute
Turning Virtual Mic mode ON (blue) enables GPO1/GPO2 settings.
1. Click the switch to turn on/off the setting.
• The function is turned ON (blue)/OFF (no color) each time the dial is
clicked.
2. Set "Mute"/"Unmute".
• The signal output from the GPO1 and GPO2 terminals during "Mute" and
"Unmute" can be selected from "Open" and "Close".
3. Click “Apply”.
• Setting is complete.
• Works with the array microphone icon on the operator page.
Utilities (System Settings)