Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 37)

37
Setting the audio output details
How to view settings screen (DYN)
❶ Indicates the level of audio input to Dynamics.
❷ Indicates the level of audio gain suppression by the compressor.
❸ Indicates the level of audio output from Dynamics.
❹ Indicates the Dynamics characteristic.
❺ Set each item for the compressor.
Ratio: Set the compressor ratio.
Threshold: Set the compressor threshold.
Attack: Set the compressor attack time.
Release: Set the compressor release time.
❻
Select whether the dynamics are assigned to Pre EQ or Post EQ.
❼
Switches between compressor/de-esser.
❽
Set the Dynamics output gain.
❾
Set the Limiter threshold.
❿
Adjust the frequency of the de-esser.
⓫
Adjust the Q value of the de-esser.
⓬
Adjusts the gain of the de-esser.
⓭
Change the filter type.
⓮
Turns the Listen function on or off.
⓯
Set the low cut ON/OFF.
❷
When the limiter threshold is lower than
the compressor threshold, the compressor
threshold is cleared, and only the limiter
threshold is displayed.
Limiter
threshold
Compressor
threshold
B
A:B = Ratio
A
❿ ⓫ ⓬ ⓭ ⓮ ⓯
❶ ❸ ❹ ❺ ❽ ❾ ❻ ❼