Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 47)

47
Setting the system details (Settings & Maintenance)
Exporting a preset
1. Click the radio button corresponding to the preset number from
which you want to export.
• Clicking the button selects the preset (the color turns to blue).
2. Click “Export”.
3. Set the save location/file name, and export the file.
Importing a preset
A preset created elsewhere can be imported.
1. Click the radio button corresponding to the preset number to
which you want to import.
• Clicking the button selects the preset (the color turns to blue).
2. Click “Browse”, and select the external file.
3. Click “Import”.
• The preset is imported.
Preset Recall LINK
Set whether or not to link Preset Recall between Audio-Technica LINK
devices.
1. Click the switch to turn on/off the setting.
• The function is turned ON (blue)/OFF (no color) each time the dial is
clicked.
Partial Preset (Presets)
Unlike presets used to save settings for an entire device, these presets
only save parameters selected by choice. Settings can be recalled
without affecting parameters other than the saved parameters.
Changing a partial preset name
1. Click on the name of the partial preset you wish to change.
2. Enter a partial preset name.
Setting partial preset parameters
1. Click the radio button for the partial preset number you wish to
set.
• Clicking the button selects the preset (the color turns to blue).
2. Set each parameter from "Partial preset Parameters".
3. Click "Save."
• The partial preset is saved.
Recalling a partial preset
1. Click the radio button for the partial preset number you wish to
recall.
• Clicking the button selects the preset (the color turns to blue).
2. Click "Recall".
Exporting a partial preset
1. Click the radio button for the partial preset number you wish to
change.
• Clicking the button selects the preset (the color turns to blue).
2. Click “Export”.
Importing a partial preset
1. Click the radio button for the partial preset number you wish to
load.
• Clicking the button selects the preset (the color turns to blue).
2. Click “Browse”, and select the external file.
3. Click “Import”.
• The partial preset is imported.