Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 16)

16
Using the product
Locking the front panel
A lock can be applied so that the front panel operation is disabled.
1. While pressing the OUTPUT SEL button, press and hold the dial
button (for 1 or more seconds).
• The front panel becomes locked. Repeat the same steps to disable the
lock and enable input/output level adjustment in operator mode or gain
adjustment in advanced mode.
• The PRESET LED, the LEVEL/GAIN LED, the INPUT SEL LED, and the
volume LED turn off.
• The OUTPUT SEL LED is on while the panel is locked.
• Other LEDs turn on based on the level of an audio input.
Checking the firmware version
You can view the firmware version of the product.
1. Press the power button.
• The PRESET LED becomes lit.
2. When the PRESET LED starts blinking, press and hold the
MODE button and the dial button.
3. When the LEVEL LED becomes lit, release the buttons.
• LEDs light according to the firmware version.
(Example) When the firmware version is “02.03.05”
4. Check the firmware version, and turn off the product.
Indicates “02”
Represents "03".
Inficates "05".