Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 28)

28
Setting the audio input details
How to view settings screen (EQ)
❶ Display and edit the EQ frequency response waveform. The pointer
for each band indicates the frequency and the gain position.
• Edit the frequency and the gain by dragging a pointer.
❷ Display and toggle ON/OFF for each band.
The ON and OFF statuses indicate as follows.
Turned ON.
Turned OFF.
❸
In all bands, leave the frequency unchanged and set the gain to 0.
❹ Adjust the gain of each band.
❺ Adjust the frequency of each band.
❻ Adjust the Q value for each band.
❼ Change the filter type (Band 1 and Band 4 only).
❽ Save EQ presets, resets EQ frequency response waveforms, and
also switches between setting screens.
❸
❽
❷
❹
❸
❺
❻
❼