Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 56)

56
Key functions
Audio-Technica LINK
This product can daisy-chain up to eight ATDM-0604a units to support 48 mic/line inputs and 8 unbalanced stereo audio inputs for the entire
system. The proprietary Audio-Technica LINK functionality enables the transmission of low-latency, high-speed audio bus signals between devices,
making it possible to steadily control and transmit uncompressed audio signals.
Furthermore, the model offers excellent workability as it conforms to the Ethernet standards and can be connected to generic LAN cables (shielded
cables of Cat5e or above with the conductor diameter size of 24 AWG or larger must be used).
Connection and setting procedures
1. Daisy-chain up to 8 ATDM-0604a units.
• Do not connect units in a ring pattern. Be sure to leave one of the LINK terminals of the ATDM-0604a at both ends of the connection unconnected.
• For connections, use a LAN cable of Cat5e or above with conductor diameter size of 24 AWG or larger (shielded cables are recommended).
2. Start the web remote and configure the settings related to Audio-Technica LINK for each ATDM-0604a.
3. In "Audio-Technica LINK mode", set the ATDM-0604a connected at either end to be the "Priimary".
• Do not set the ATDM-0604a connected in the middle as the "parent unit". The connection will not be recognized properly.
4. Other ATDM-0604a should be set to "Extension".
• Do not configure "Primary" settings on more than one ATDM-0604a.
A
B
A
B
Primary
Connection example
Extension No. 1
Extension No. 7
・・・・
Up to 8