Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 25)

25
Setting the audio input details
Turning the compressor ON/OFF
Switch the compressor between ON and OFF for each channel. This
setting can be made only when the compressor module is assigned.
1. Click the area in the red box on the screen shown below.
• The function is turned ON (blue)/OFF (no color) each time the dial is
clicked.
Turning the FBS ON/OFF
Switch the FBS (feedback suppressor) between ON and OFF for each
channel. This setting can be made only when the FBS module is
assigned.
1. Click on "FBS."
2. Select the check box next to the channel(s) to which it will be
assigned.
3. Click the area in the red box on the screen shown below.
• The setting is turned ON (blue)/OFF (no color) each time the switch is
clicked.