Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 31)

31
Setting the audio input details
Turning the AEC ON/OFF
Turn on/off the AEC (Acoustic Echo Canceler).
1. Click the area in the red box on the screen shown below.
• The function is turned ON (blue)/OFF (no color) each time the dial is
clicked.
Checking SmartMixer status
1. Check the area in the red box on the screen shown below.
• Click on the screen to display the SmartMixer Settings screen. For more
details, refer to p.53.
Turned OFF.
Turned ON.
Turned ON, and SmartMixer active. Displayed in the set
group color.
Turning the bus assignment ON/OFF
Switch the output bus between ON and OFF for each channel.
1. Click the area in the red box on the screen shown below.
• The function is turned ON (purple)/ON (blue)/OFF (no color) each time the
switch is clicked.
ON (Purple) Audio signals processed by SmartMixer are output when
SmartMixer is turned ON.
ON (Blue) Assigned to the output bus. Even when the Smart Mixer
is on, the audio signal is output through the Smart
Mixer.
OFF Not assigned to any output bus.
”Priority” is turned ON if ”Gate” is displayed in red.