Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 55)

55
Key functions
3. Click “Enabled” for each channel that should operate with the
SmartMixer function.
• Click to turn ON (blue).
4. Set “Weight” for each channel, as necessary.
• The gain to be distributed can be adjusted. This can be used also to
balance the background noise for each channel.
5. Assign signals to the output buses.
ON (Purple) Audio signals processed by SmartMixer are output when
SmartMixer is turned ON.
ON (Blue) Assigned to the output bus. Even when the Smart Mixer
is on, the audio signal is output through the Smart
Mixer.
OFF Not assigned to any output bus.
6. Monitor the gain meter of each channel to confirm that the total
gain is distributed based on the input signals.