Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 36)

36
Setting the audio output details
How to view settings screen (EQ)
❶ Display and edit the EQ frequency response waveform. The pointer
for each band indicates the frequency and the gain position.
• Edit the frequency and the gain by dragging a pointer.
❷ Display and switch the ON/OFF setting of each band.
The ON and OFF statuses indicate as follows.
Turned ON.
Turned OFF.
❸ In all bands, change the gain to 0 without changing the current
frequency.
❹ Adjust the gain of each band.
❺ Adjust the frequency of each band.
❻ Adjust the Q value of each band.
❼ Change the filter type (applicable to bands 1 and 12 only).
❽ Reset a parameter and save/recall an EQ preset.
❸
❷
❹
❶
❺
❻
❼
❽