Audio-Technica ATDM-0604a 6-Channel Digital SmartMixer - Manual (Page 41)

41
Setting the audio output details
Setting the oscillator
The product has an oscillator function on the output channels.
This function is convenient for checking the audio during setup or
maintenance.
1. Click on "Oscillator".
2. Click "Enabled".
3. Select "Sine Wave" or "Pink Noise" under "Source".
4. Select a frequency under "Frequency".
5. Adjust the level under "Level".
6. Select an output channel under "Assign".
• When “Enabled” is ON for the selected channels, the oscillator will be
activated.